GE - IC200PWR001

The GE Fanuc IC200PWR001 is a 24 Volts DC power supply input module that provides power to CPU, NIU, and I/O modules via the backplane. The power supply module has a maximum output current of 1.5 amps via 3.3 volts & 5-volt output, with up to 0.25 amps on the 3.3-volt output. If the power supply module is mounted on the CPU or NIU, it can be considered the station's main power supply. When mounted on a Power Supply Booster Carrier, the supply module can also be used as a backup power supply. It has an input voltage range of 18 to 30VDC, a nominal voltage of 24VDC, and an input power of 11 watts.

• This power supply module has a 10ms holdup time, an inrush current of 20A at 24VDC, and a 25A inrush current at 30VDC. It also has an output voltage of 5VDC and 3.3VDC. The total output current should not be more than 1.5A.
• The supply module provides short circuit, overload, and reverse polarity protection. DC- must be grounded to frame/earth ground when wiring. Because DC- is grounded to the power supply's internal frame, floating power sources should not be used.